What is the classification and main structure of the wire drawing machine?

Source:

YOUMALE

LT type water tank wire drawing machine

The diameter of the finished wire drawing is between 0.1-1.2mm, and the working characteristics are sliding wire drawing and multi-pass drawing;

LW pulley wire drawing machine

The diameter of the finished wire drawing is in the range of 0.5-4.5mm, and the working characteristics are wire drawing without sliding and twisting;

LS type double drum wire drawing machine

The diameter of the finished wire drawing is in the range of 0.4-3.5mm, and the working characteristics are no sliding wire drawing, no twisting;

LH type looper wire drawing machine

The diameter of the finished wire drawing is between 0.5-6.0mm, and the working characteristics are no sliding and no twisting;

LZ type linear wire drawing machine

The diameter of the finished wire drawing is in the range of 0.5-7.0mm, and the working characteristics are no sliding and no twisting;

LD type single wire drawing machine

The diameter of the finished wire drawing is not more than 22mm, and the working characteristics are 1-2 passes of drawing;

Horizontal wire drawing machine

The diameter range of the finished wire drawing is 6.5-24mm, and the working characteristics are non-sliding wire drawing, and the diameter of the drawn wire is large;

Inverted wire drawing machine

The diameter range of the finished wire drawing is not more than 30mm, and the working characteristics are high degree of automation, simultaneous drawing and take-up, the weight of the take-up reel can reach 2, the wire unloading is convenient and reliable, the operation is simple, the production efficiency is high, and it is safe and reliable.

Key words:

Straight Wire Drawing Machine / Water Tank Wire Drawing Machine / Inverted Wire Drawing Machine / Annealing Furnace / Take-up and Pay-off Unit / Rewinding Machine

Back to List

More information